- Service Details
What are third party quality pre-shipment inspections for Plush Toys, Pet Toys, legos, Garlands, Action Figures, Wrist Bands, and Air Inflatables etcs.? The on-site QC inspectors will visit the factories and check as follows:
In general, there are following kinds of Pre-shipment inspections:
As an example, below is one of our on-site inspection checklist for a Plush Toys:
|Function test according to the purpose & on the gift box claimed
|Pull Test on small parts (if the toys is designed for children under 3 years) 90N for 1 min, no breakage allowed
|Perform fatigue test for all adjustable parts
|Perform a pull test (for plush toy only)- Test any small, rigid parts such as: eyes, nose, pom-pom, label, etc (if designed for children under 3 years old). If the part is >6 mm thick, use 90N of force. If the part is <= 6 mm thick, use 50 N of force.-S2
|Pull test on seam Apply 70N onto the seam gradually within a period of 5 sec; maintain this force for 10 sec Test Requirement: The test sample must withstand the defined force for the defined period
|Metal detection check
|Compare mass product with approved sample and the requirement in the attachment.
|Stuffing material cleanness check if applicable
|check the smell of product/filling is bad smell?
|pull test in all seams by manually
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.