China Inspection

CTS SERVICE LIMITED
Shenzhen WeCheck CTS Co Ltd

Goodsolutionsfor yourbusiness!

Preshipment Inspection > Power Tool Drill Cement Concrete Glass Cutter Grinder Hammer Polisher Mixer Screw Driver


The Product Quality Pre-shipment Inspections for Power Tools, Power Drills, Cement Mixers, Concrete Cutters, Glass Cutters, Grinders, Hammers, Polishers, and Hammers etc.:

  1. Quantity Inspection/Check
  2. Packing Inspections: assortment, carton sealing, tapings, shipping marks, gift boxes and wrappings etc.
  3. Labels, SKUs, Barcodes, Logos
  4. Measurements, Sizes, Weights
  5. Colours, Assemblies
  6. Function & Safety On-site Testing
  7. Visual Defects: Critical Defects, Major Defects, Minor Defects
  8. Special requirements & attentions etc.

The 3rd party inspection types are:


Power tool inspections

CHECK LIST COMMENTS RESULT
E1.Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces) Passed
E3.For adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 Passed
E4.Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit;  if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling. N/A
E5.Check if the base of the item wobbles by placing it on a flat, glass surface--II N/A
E6.perform quantity and assortment check in each package--S3 N/A
E7.Perform a strength check.-Test all connections using normal force.-II  N/A
E8.Perform a humidity test on solid wood and MDF parts with wood humidity tester(brand name: testo), Please fill the detail finding table for wood humidity test. The sample should be taken:  - On S3;  - In at least 10 different cartons  - Provide at least 1 picture for each measurement point position (to show where the test was done = 3 pictures totaly)-Check the humidity  for wood: check 3 points(a, b and c) per unit- For wooden items, the humidity tolerance for   April to October: 12% Max -II  N/A
E9.Perform a fatigue test on all adjustable parts.--S2  N/A
E10.Check all the accessories with the item.--S2  N/A
E11.Perform an assembly check.--II  N/A
E12.Perform a Hi-pot testing -II N/A
E13.Perform a voltage range test -II N/A
E14.Perform the standard power test-II N/A
E15.Function test : --II  N/A
E16.Run the test work for 4 hour ----S2 N/A
E18.Perform an internal check.-Take all related pictures to show special requirements.-S1 (5 Pcs) Failed 


3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.


367

Twitter