Service Details
- Home
- Service Details
The furniture products like cabinets, are mostly made of MDF (medium density fiberboard), and some of them are of metal (steel file cabinets, aluminium cabinets etc.). The pre-shipment inspections for cabinets will check:
The 3rd party inspection services are mostly as below:
Please find below for an example of an on-site inspetion checklist for cabinets:
ONSITE INSPECTION LIST | COMMENTS | RESULT |
---|---|---|
Perform a function test –II | PASSED | |
Test the strength of the seams by hand—II | PASSED | |
Perform assembly test according the manual instruction step by step.-S2 | PASSED | |
Perform a static loading test*- 300 lbs during 1 hour on the center of every seat simultaneously, at least 5cm away from the edges - There should be no obvious deformities | PASSED | |
Perform a function test –II | PASSED | |
If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects--S1 | FAILED | |
Perform a fatigue test.- On all adjustable parts. Do this 20 times-S1 | FAILED | |
Perform a stability test. -For the front: The chair should not tip over when pushed with a downward force at the front edge equal to 40% of the chair’s weight. For the rear: The chair should not tip over when it is loaded with 175lbs, and pulled with a force of 25 lbs from the rear. Please take clear picture to show that the product is in the most unfavorable position on the inclined plane.-S1 |
FAILED | |
Perform a fatigue test.- On all adjustable parts. Do this 20 times-S1 | PASSED | |
Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.-II | PASSED | |
Perform moisture content test –(Check the moisture content of all wooden parts. - Check 3 points per piece and take the average data: (a+b+c)/3 - The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.-S2) | PASSED | |
Perform assembly test according the manual instruction step by step.-S2 | PASSED | |
Perform moisture content test –(Check the moisture content of all wooden parts. - Check 3 points per piece and take the average data: (a+b+c)/3 - The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.-S2) |
PASSED | |
If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects--S1 | N/A | |
Perform a stability test. -For the front: The chair should not tip over when pushed with a downward force at the front edge equal to 40% of the chair’s weight. For the rear: The chair should not tip over when it is loaded with 175lbs, and pulled with a force of 25 lbs from the rear. Please take clear picture to show that the product is in the most unfavorable position on the inclined plane.-S1 | PASSED | |
Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.-II | PASSED | |
Perform a static loading test: - 300 lbs during 1 hour on the center of every seat simultaneously, at least 5cm away from the edges - There should be no obvious deformities |
PASSED | |
Test the strength of the seams by hand—II | PASSED |
Fujian cabinet 3rd party on-site inspection services, 3rd partycabinet on-site inspection in Fujian, third partycabinet on-site inspection in Fujian, Fujian cabinet third party on-site inspection services, Fujian cabinet 3rd party on-site inspection, Fujian cabinet third party on-site inspection, Fujian cabinet on-site inspection services, cabinet on-site inspection in Fujian
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.