Service Details

  • Home
  • Service Details

Garment FRI inspection:


How to do garment QC check? As an example, the garment quality inspection protocols would normally like below.

garment FRI inspection Protocols:

CHECK LIST COMMENTS RESULT
Washing test using soap, no color fading. PASSED
Hanger check if there is a hanger on the item-The hanger should be same as the approved sample and should not be damaged or distorted in any way. N/A
Feeling by hand to check if the fabric with humidity. FAILED
Needle Damage check - Pull the seams by hand in toughly force and check if there is any needle hole caused by the sewing machine - perform this test on all the seams -double check and take a picture especially for” waistband, leg hem, pocket seam, front and back rise...” -If needle damage holes were found, then the sample size increase to S4 record how many pcs with needle damage were found from the sample size S3 FAILED
Check the net weight for sweater garments (unit: lbs per dozen). Check 3 pieces per size. PASSED
Check how the garments are folded and show finished folded dimensions of the garments--Check once only PASSED
Check percentage statements for each kind of fiber in a garment. PASSED
Check the Care label content and symbols-1pc for each size each reference,
the content match with the client’s requirement and fabric composition.
PASSED
Zipper test - pull through the rivets/zipper/ Velcro and snap it should be resistant-The zip should lock when it closed - The zip should not open from the middle - the stress should be focus on the bartack-20 pcs FAILED
Perform a check the smell of fabric/garment is BAD? PASSED
Perform metal detecting test PASSED
Fitting on a model or a doll, If no mannequin available ask someone to wear his (her) size and insert picture of front, back and side-Should fit perfectly to the model and have the same effect than client pictures.
** ALL LINING DO NOT HANG OUT OF SELF FABRIC WHEN THE GARMENT IS WEARING ** 检查试穿时不能有任何里衬外露情况。
N/A
Symmetric check - check if the right/left leg, sleeves, pocket design are symmetric - check if the garment twist and measure the difference if found PASSED
garment FRI inspection

An example of the garment pre-shipment inspection ->Measurement Chart:

size point size 10 size 12 tol
chest at U'arm seam level 70 0 1 0.5 1 0 75 0.5 1 0 1 0 2
underbust at seam 68 -0.5 -1 -0.5 0 0.5 73 -1 0 0.5 0.5 0 2
waist at seam 68 0 -1 -0.5 0 0.5 73 -0.5 0 0.5 0.5 0 2
hem-2 x across back 111 1.5 1 2.5 1.5 1 116 1 1.5 1 1.5 1 2
C/B length to hem 64.5 1 1 0.5 0.5 0 64.8 1 1 0.5 0 1 1
neck drop front strap point to seam 15.5 0 0.5 0.5 0.5 0 15.8 0.5 0.5 0 0 0.5 0.5
neck drop back strap point to seam 17.5 0 0.5 0.5 0 0.5 17.5 0.5 0.5 0 0 0 0.5
front strap separation 18 0 0 0 0 0 18.6 0 0 0 0 0 0.5

3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x