Service Details

  • Home
  • Service Details

Garment accessories 3rd party inspection:


For the QC check inspections for garment accessories,like buckles, buttons, zippers, hangers and snaps etc., the quality inspector will normally check as follows:

INSPECTION CHECKPOINTS RESULTS COMMENTS
A. Quantity check OK
B. Shipping marks & packing N/A
C. Labels, logos and colors OK
D. Styles & measurements OK
E. Onsite safety and function tests OK
F. Special requirements OK
G. AQL workmanship
(Visual checks)
OK

Most of the pre-shipment inspections are final random checks, please find all quality inspection services as below:

garment accessories 3rd party inspection

The QC check list as an example as below:

CHECK LIST COMMENTS RESULT
Perform a function test.-Of the on/off switch, dimmer switch, the sensor and all other functions listed on the item’s box.- (3Pcs) Dropped from 76cm height - On 3 cartons- PASSED
Compare with approval sample Close to approval sample N/A 
Perfom a rub test and Adhesive Test for printing: Rub test: 15 second with cloth soaked with Water and 15 second with cloth soaked with Hexane. Adhesive test: with 3M tape.-The priting should still be clearly readable after testing-S2 (8 Pcs) S-2 8pcs samples check PASSED 
Perform a barcode scanning test.-The inspector must scan the barcode. The numbers found after scanning must match the numbers below the barcode.-S2 on 8 boxes, all ok PASSED 
Smell check on all samples PASSED
Zipper Tests on all samples N/A 
Function check On 200 pcs, please refer to below table FAILED

preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x