Service Details

  • Home
  • Service Details

Jewelry onsite inspection:


The third party inspection services for Jewelries will be performed according to below procedures:

INSPECTION CHECKPOINTS RESULTS COMMENTS
A. Quantity verify N/A
B. Shipping marks & packing OK
C. Labels, logos and colors OK
D. Styles & measurements OK
E. Onsite safety and function tests NOT OK
F. Special requirements OK
G. AQL workmanship
(Visual inspections)
OK

For most professional inspection companies, there are standards to follow, definitions to abide, and purpose to meet. To achieve them, we divide the product inspections into:

jewelry onsite inspection

As an examples, some of the jewelry inspection checkpoints could be:

CHECK LIST COMMENTS RESULT
Translucidus check-II   Passed
Knock check-S1   Passed
Detachable check-S1   Passed
Handle strength check-S3   Passed
Perform an application function check-II   Passed
Perform quantity and assortment check in each package--S3   Passed
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not available , use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable and they shall show no curling.   Passed
For adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2   N/A
Smell check-check if there are any strong offensive odor-II   Failed
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)   Passed

3rd party preshipment products goods factory inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x