Service Details
- Home
- Service Details
For the QC check inspections for garment accessories, like buckles, buttons, zippers, hangers and snaps etc., the quality inspector will normally check as follows:
INSPECTION CHECKPOINTS | RESULTS | COMMENTS |
---|---|---|
Packaging, safety and drop tests onsite | OK | |
Quantity & assortment inspections | OK | |
On-site safety, regulation & function tests | OK | |
Product specs, and special requirements verifying | OK | |
Aesthetic, visual defects, workmanship, surface and function inspections | OK | |
Measurements & sizes checks | OK | |
Labels, markings, logos & barcodes QC inspections | OK |
Most of the pre-shipment inspections are final random checks, please find all quality inspection services as below:
The QC check list as an example as below:
CHECK LIST | COMMENTS | RESULT |
---|---|---|
Perform a function test.-Of the on/off switch, dimmer switch, the sensor and all other functions listed on the item’s box.- (3Pcs) | Dropped from 76cm height - On 3 cartons- | PASSED |
Compare with approval sample | Close to approval sample | N/A |
Perfom a rub test and Adhesive Test for printing: Rub test: 15 second with cloth soaked with Water and 15 second with cloth soaked with Hexane. Adhesive test: with 3M tape.-The priting should still be clearly readable after testing-S2 (8 Pcs) | S-2 8pcs samples check | PASSED |
Perform a barcode scanning test.-The inspector must scan the barcode. The numbers found after scanning must match the numbers below the barcode.-S2 | on 8 boxes, all ok | PASSED |
Smell check | on all samples | PASSED |
Zipper Tests | on all samples | N/A |
Function check | On 200 pcs, please refer to below table | FAILED |
3rd party products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.