Service Details

  • Home
  • Service Details

Iron QC inspection:


How to inspect a presser pressing iron in 3rd party pre-shipment QC check AQL on-site in-line?

  • On-site safety, regulation & function testing
  • Product specs, and special requirements check
  • Measurements & sizes check
  • Labels, markings, logos & barcodes check
  • Aesthetic, visual defects, workmanship, surface and function check
  • Packaging, safety and drop tests
  • Quantity & assortment verifying

Our third party quality inspection types can be divided into:

iron QC inspection
An examples of a checklist for Electrical fans inspection:
TESTS AND SPECIAL REQUIREMENTS
Requirements Comments from Inspector Result
Perform a carton drop test: 10 drops from the correct height based on carton weight as defined in ISTA 1 A(6 faces, 3 edges,1 corner) - On 1 cartons – packed products should not get damaged
Perform a rub test and an adhesive test-Perform the rub and adhesive test on all of printing, marking and logo found on the product: Use alcohol if petroleum spirits is not available for rub test; Use 3M tape for the adhesive test on the silk-screening and painting. -S2 Test on 8pcs
Perform function test level II(such as Tilting Function; on/off button test) Test on all samples
Pull test for power supply cord -60N for 25 times within 1 minute not more than 2mm (S2) Test on 8pcs
Hi-pot test
Wobble test for the unit-place the product on the flat surface and check it’s wobble or not Test on all samples
Perform stability test 10 degree –S2 Checked on 8pcs
Taking photo for all of the artwork (shipping mark ,rating label ,instruction for use ,price label, address and so on) Refer to product packing part and product status part
Running test during the whole inspection Period 3pcs per item 3pcs per item
Perform an internal check. Refer to pictures as below Actual finding
Perform a low-voltage starting test. Test on 187V, 3pcs per item
Check the power consumption
Perform a fatigue test for switch and Adjust-able part.
Perform an earth continuity test if applicable, the result of the test should be < 0.1Ohm. Checked on all samples

3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x