Service Details
- Home
- Service Details
We offer extensive hardware quality inspections regardless if they are computer hardware inspections, or metalware pre-shipment inspections, screws final inspections, bolts on-site check, nails in-line QC, fasteners QC check, screwdrivers factory inspection, fittings third party inspection, pipings shipment inspections, gardening tools QC check, lawnmowers QC inspections etc.
The hardware QC inspections will reveiw:
INSPECTION CHECKPOINTS | RESULTS | COMMENTS |
---|---|---|
Quantity & assortment inspections | OK | |
On-site safety, regulation & function tests | OK | |
Labels, markings, logos & barcodes quality check | OK | |
Aesthetic, visual defects, workmanship, surface and function checks | OK | |
Product specs, and special requirements verifications | OK | |
Packaging, safety and drop tests onsite | NOT OK | |
Measurements & sizes checks | OK |
The are below types of hardware on-site QC checks:
Please find below for a hardware inspection checklists fyi:
INSPECTION LIST | COMMENTS | RESULT |
---|---|---|
Perform an all-accessories check.-Check all the accessories with the item. All accessories should be included.-II | FAILED | |
Tests that are not mentioned in the special product(特别产品没有提及的检验,根据工厂设备和验货员经验,请自行加上) | PASSED | |
Perform a barcode scanning test.-The inspector must scan the barcode. The numbers found after scanning must match the numbers below the barcode.-S2 (8 Pcs) | PASSED | |
Perform assembly check-S1 | PASSED | |
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2(烤漆,喷油请做百格测试) | FAILED | |
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling.-S2 | PASSED | |
Smell check-check if there are any strong offensive odor-II | FAILED | |
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-S1 | PASSED |
hardware third party inspection services in China, hardware third party inspection, China hardware third party inspection services, hardware inspection services in China, hardware third party inspection in China, China hardware inspection services, hardware 3rd party inspection services in China, hardware 3rd party inspection in China, hardware 3rd party inspection, hardware inspection services, China hardware third party inspection, China hardware 3rd party inspection services, China hardware inspection, hardware inspection in China, China hardware 3rd party inspection, hardware third party inspection services, hardware 3rd party inspection services
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.