Service Details
- Home
- Service Details
We offer extensive hardware quality inspections regardless if they are computer hardware inspections, or metalware pre-shipment inspections, screws final inspections, bolts on-site check, nails in-line QC, fasteners QC check, screwdrivers factory inspection, fittings third party inspection, pipings shipment inspections, gardening tools QC check, lawnmowers QC inspections etc.
The hardware QC inspections will reveiw:
INSPECTION CHECKPOINTS | RESULTS | COMMENTS |
---|---|---|
Quantity & assortment checks | N/A | |
Product specs, and special requirements verifying | OK | |
Labels, markings, logos & barcodes quality inspections | N/A | |
Packaging, safety and drop tests onsite | NOT OK | |
On-site safety, regulation & function tests | OK | |
Aesthetic, visual defects, workmanship, surface and function inspections | N/A | |
Measurements & sizes checks | NOT OK |
The are below types of hardware on-site QC checks:
Please find below for a hardware inspection checklists fyi:
CHECK LIST | COMMENTS | RESULT |
---|---|---|
Perform assembly check-S1 | FAILED | |
Perform a barcode scanning test.-The inspector must scan the barcode. The numbers found after scanning must match the numbers below the barcode.-S2 (8 Pcs) | PASSED | |
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-S1 | PASSED | |
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling.-S2 | PASSED | |
Tests that are not mentioned in the special product(特别产品没有提及的检验,根据工厂设备和验货员经验,请自行加上) | PASSED | |
Smell check-check if there are any strong offensive odor-II | PASSED | |
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2(烤漆,喷油请做百格测试) | PASSED | |
Perform an all-accessories check.-Check all the accessories with the item. All accessories should be included.-II | PASSED |
hardware third party QA services, hardware 3rd party QA services in China, China hardware third party QA services, China hardware 3rd party QA services, China hardware QA services, hardware QA services in China, China hardware third party QA services, hardware third party QA services in China, hardware third party QA services in China, hardware 3rd party QA services, hardware QA services, China hardware QA services, hardware third party QA services, hardware QA services in China, China hardware 3rd party QA services, hardware 3rd party QA services, hardware 3rd party QA services in China
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance in China India Vietnam Thailand Malaysia Bangladesh Taiwan.