Service Details
- Home
- Service Details
There are below on-site in-line quality check procedures for the electric tool inspections:
An example of the third party inspections for electric tools:
ONSITE INSPECTION CHECK LIST | COMMENTS | RESULT |
---|---|---|
Pull testing(60N) for Power cord test. -S2 | FAILED | |
Application testing and Real function test-S1 | PASSED | |
No load speed:(额定电压的空载转度)—S2 | PASSED | |
Power cable Size 4m for all item-S2 | PASSED | |
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling. | PASSED | |
Leakage current test--II | PASSED | |
Power consumption test-The voltage input should be the same as rating voltage in rating label, otherwise the result of power consumption will not be accurate--II |
FAILED | |
Run the test work for 4 hour ----S2 | FAILED | |
Other test | FAILED | |
Serial no(此批产品的序列号) | PASSED | |
Perform the standard power test-II. | FAILED | |
.Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces) The Carton should fall down At 61cm height without damage-S1 |
PASSED | |
Perform an assembly test. | PASSED | |
perform quantity and assortment check in each package--S1 | PASSED | |
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 | PASSED | |
Disc Size(打磨刀片尺寸) | PASSED | |
Perform a voltage range test -II (额定电压的+-10%) | PASSED | |
PLUG& Power Cord view-S2 | PASSED | |
Smell check-check if there are any strong offensive odor-II | N/A | |
Perform a Hi-pot testing -II | N/A | |
Perform a strength check.-Test all connections using normal force.-II | N/A | |
Perform an internal check.- Internal check: take a photo to show all that the item contains All the components specified by the client. need to write down the marking on all critical components-All Internal wiring should be routed to provide sufficient creep age and clearance distances and to so as to avoid damage to the insulation. All screws should be found, they should be fully tightened and with no damage to the screw heads. request at least one picture to show the whole construction of product-S1 |
PASSED | |
Perform a normal function test. .-II | PASSED | |
Perform a barcode –scanning test .The barcode should be scannable and have the correct number for all barcode label. (-S3) | N/A | |
Check if the base of the item wobbles by placing it on a flat, glass surface--II | PASSED | |
Perform a fatigue test for all adjustable parts: Do this 20 times for assemble and sand paper on tool head – There should be no damage to the item. ----S2 |
PASSED |
electric tool third party AQL inspection services, electric tool 3rd party AQL inspection, electric tool 3rd party AQL inspection services in China, China electric tool third party AQL inspection services, electric tool third party AQL inspection services in China, electric tool 3rd party AQL inspection in China, electric tool third party AQL inspection, China electric tool 3rd party AQL inspection services, electric tool AQL inspection services in China, China electric tool AQL inspection services, electric tool AQL inspection in China, China electric tool AQL inspection, electric tool AQL inspection services, electric tool third party AQL inspection in China, China electric tool third party AQL inspection, China electric tool 3rd party AQL inspection, electric tool 3rd party AQL inspection services
3rd party preshipment products goods factory onsite inline final Random PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.