Service Details

  • Home
  • Service Details

Balance scooter preshipment inspection:


The on-site inspections for balance scooters will mainly check as follows:

  1. Quantity Inspection/Check
  2. Packing Inspections: assortment, carton sealing, tapings, shipping marks, gift boxes and wrappings etc.
  3. Labels, SKUs, Barcodes, Logos
  4. Measurements, Sizes, Weights
  5. Colours, Assemblies
  6. Function & Safety On-site Testing
  7. Visual Defects: Critical Defects, Major Defects, Minor Defects
  8. Special requirements & attentions etc.
balance scooter preshipment inspection

p>please find below for a checklist for Balance Scooter Pre-shipment QC Check Inspection:

CHECK LIST COMMENTS RESULT
Scan for UPC barcode label and master barcode PASSED
Perform hi-pot test-II N/A 
Check the current and power-S2 N/A 
LOAD & short test-II   FAILED
Battery :36V 7.8AH  FAILED
Perform battery charge test.--S1 FAILED
Perform a battery check:
/ Voltage / Polarity / Capacity check/ Voltage as per rating / Polarity as per specifications/Capacity to be checked by running charge and discharge test and record the related curves-S1
PASSED
Charging Voltage:42V 1.5AH 100- 240V,50/60Hz  PASSED
Lamp:LED Height:120-200cm  PASSED
Maximum loading :120kg PASSED
Tire size :8.5inch轮胎尺寸 PASSED
Max speed:25KM/H  PASSED
Motor rated power:250W  PASSED
Max climbing :15 Degrees PASSED
Check CE or UL label size no less than 5 mm PASSED
Internal performance check. --S1
A. Take a clear photo for the marking for memory IC and Flash IC, battery marking.
B. check the soldering quality on the PCB, there are no soldering ball and soldering residue inside.
C. the live part distributing reasonable inside.
PASSED
The factory provides relevant international certification PASSED

3rd party products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x