Service Details

  • Home
  • Service Details

Jewelry quality inspection:

The third party inspection services for Jewelries will be performed according to below procedures:

Packaging, safety and drop tests onsite OK
Labels, markings, logos & barcodes checks OK
Aesthetic, visual defects, workmanship, surface and function inspections NOT OK
Product specs, and special requirements verifying OK
Quantity & assortment checks NOT OK
On-site safety, regulation & function tests OK
Measurements & sizes checks NOT OK

For most professional inspection companies, there are standards to follow, definitions to abide, and purpose to meet. To achieve them, we divide the product inspections into:

jewelry quality inspection

As an examples, some of the jewelry inspection checkpoints could be:

Translucidus check-II   Passed
Knock check-S1   Passed
Detachable check-S1   Passed
Handle strength check-S3   Passed
Perform an application function check-II   Passed
Perform quantity and assortment check in each package--S3   Passed
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not available , use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable and they shall show no curling.   Passed
For adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2   N/A
Smell check-check if there are any strong offensive odor-II   Failed
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)   Passed

3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.