Service Details
- Home
- Service Details
The QC check inspection for drinking mugs for water, beer, beverage, travel made of ceramics or porcelain or glass listed as below:
INSPECTION CHECKPOINTS | RESULTS | COMMENTS |
---|---|---|
Aesthetic, visual defects, workmanship, surface and function inspection | NOT OK | |
Product specs, and special requirements check | N/A | |
Quantity & assortment verifying | OK | |
Labels, markings, logos & barcodes quality check | NOT OK | |
Packaging, safety and drop tests onsite | OK | |
On-site safety, regulation & function testing | OK | |
Measurements & sizes check | NOT OK |
The third party mugs inspections will be:
Please find below for a mug quality inspection checklist:
ONSITE INSPECTION LIST | COMMENTS | RESULT |
---|---|---|
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling.-S4 | PASSED | |
Capacity check -S1容量测试 根据客人不同产品要求,对应容量测试 --陶瓷杯 280 ml, Tolerance - 10 ml or + 20 ml --Motta Milk Pitcher Volume: 750ml --Italian Expresso Jug Volume: 70ml |
N/A | |
Lab certified.(询问工厂提供相关测试证书如SGS) | PASSED | |
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 | PASSED | |
Check if the base of the item wobbles, It is to be placed on the inclined plane of 8 degree to the horizontal and turned to a position that results in tip over.(8度斜度板) –II如果工厂没有斜度板,请在玻璃板的一边垫些东西模拟这个斜度进行测试(装满水也试一下) | PASSED | |
Perform a stability test -Please take clear picture to show that the bottom of the product is flat on the surface of glass -S2 (放在玻璃平面看是否稳定,不能有摇晃) | FAILED | |
Stainless steel check 不锈钢材料测试(拍照不锈钢的型号和用磁铁试试Material: Stainless steel 18/8 [304] , Handle Stainless steel 201 ) | FAILED | |
Scan test for barcode label | FAILED | |
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-3Cartons Perform a mail box drop test on mail box:10 times(1 corner 3 edges 6 faces)-3boxes(If mail order) |
PASSED | |
Smell check-check if there are any strong offensive odor-II | FAILED | |
Leakage water test for hot water and cold water-S4 | PASSED | |
Make sure the logo are correct positioned conform Image(不同角度的全景) |
PASSED |
mug third party factory inspection, mug factory inspection in China, mug factory inspection services, mug 3rd party factory inspection services, mug third party factory inspection services, mug third party factory inspection services in China, mug 3rd party factory inspection, China mug 3rd party factory inspection, mug 3rd party factory inspection services in China, mug factory inspection services in China, mug third party factory inspection in China, China mug third party factory inspection, China mug factory inspection, China mug 3rd party factory inspection services, China mug factory inspection services, China mug third party factory inspection services, mug 3rd party factory inspection in China
3rd party preshipment products goods onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.