Service Details
- Home
- Service Details
How to do Quality Pre-shipment Inspections for Power Tools?
INSPECTION CHECKPOINTS | RESULTS | COMMENTS |
---|---|---|
Measurements & sizes inspections | OK | |
On-site safety, regulation & function tests | OK | |
Aesthetic, visual defects, workmanship, surface and function checks | OK | |
Product specs, and special requirements verifications | OK | |
Packaging, safety and drop tests onsite | OK | |
Labels, markings, logos & barcodes quality check | OK | |
Quantity & assortment checks | OK |
The onsite quality check for power tools we have:
The quality inspections for power tools will be like below:
ONSITE CHECK LIST | COMMENTS | RESULT |
---|---|---|
Perform a normal function test. .-II | FAILED | |
Perform the standard power test-II. | N/A | |
Run the test work for 4 hour ----S2 | PASSED | |
PLUG& Power Cord view-S2 | PASSED | |
Perform a strength check.-Test all connections using normal force.-II | PASSED | |
perform quantity and assortment check in each package--S1 | FAILED | |
Power cable Size 4m for all item-S2 | PASSED | |
Other test | FAILED | |
.Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces) The Carton should fall down At 61cm height without damage-S1 |
PASSED | |
Leakage current test--II | N/A | |
Check if the base of the item wobbles by placing it on a flat, glass surface--II | N/A | |
Perform a fatigue test for all adjustable parts: Do this 20 times for assemble and sand paper on tool head – There should be no damage to the item. ----S2 |
PASSED | |
Perform a voltage range test -II (额定电压的+-10%) | PASSED | |
Perform a barcode –scanning test .The barcode should be scannable and have the correct number for all barcode label. (-S3) | PASSED | |
No load speed:(额定电压的空载转度)—S2 | PASSED | |
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not availabel, use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable andthey shall show no curling. | N/A | |
Perform an assembly test. | PASSED | |
Power consumption test-The voltage input should be the same as rating voltage in rating label, otherwise the result of power consumption will not be accurate--II |
N/A | |
Perform a Hi-pot testing -II | N/A | |
Application testing and Real function test-S1 | PASSED | |
Disc Size(打磨刀片尺寸) | PASSED | |
Pull testing(60N) for Power cord test. -S2 | FAILED | |
Serial no(此批产品的序列号) | N/A | |
For 3M tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2<
preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan. |