Service Details
- Home
- Service Details
How to check the luggages, suitcases, handbags & backpack etc. quality control QC check inspection onsite factory preshipment? The check points are mostly as below
What are the onsite quality inspection types for backpack pre-shipment inspection?
The checkpoints for on-site inspection tests for Backpack etc.:
CHECK LIST | COMMENTS | RESULT |
---|---|---|
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces) | PASSED | |
Smell checked (there should not be offensive smells)-S1 | PASSED | |
Perform a rub test for printing and marking ; Adhesive test for coating if applicable-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit; if the spirit not available , use the 95% alcohol - After the test, the marking shall be legible, marking labels shall not be easily removable and they shall show no curling. | N/A | |
For adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2 | FAILED | |
Perform quantity and assortment check in each package--S3 | PASSED | |
Scan for UPC barcode label and master barcode | PASSED | |
Load performance test for Portable handle -S1(SIZE 455-535mm 18KGS ,560-610mm 20kgs, 635-710mm 22kgs, 735-785mm 28kgs, 840mm 30kgs.Select the weight according to the actual box size for testing) | PASSED | |
Load performance test for Side strap, side mop -S1(SIZE 455-535mm 18KGS ,560-610mm 20kgs, 635-710mm 22kgs, 735-785mm 28kgs, 840mm 30kgs.Select the weight according to the actual box size for testing) | PASSED | |
Test the vibration resistance of roller and tie rod-S1 | PASSED | |
Pressure test of hard case-S1: 535-660mm->40KGS,685-835mm -> 60KGS。Duration: 4H | PASSED | |
Impact resistance or drop test test-S1 | FAILED | |
Zipper pull strength test-S1 | PASSED | |
Suture strength test-S1 | PASSED | |
Box lock checked-S1 | PASSED | |
The standing problem is the most important for this inspection. Empty must stand well and straight. When full, must stand straight as well and not easy to fall down, above photos was full but the wheel is up and not ok.(SIZE 455-535mm 18KGS ,560-610mm 20kgs, 635-710mm 22kgs, 735-785mm 28kgs, 840mm 30kgs.Select the weight according to the actual box size for testing) | PASSED |
The loading testing chart:
Bag Size | Weight Load | ||
---|---|---|---|
(length + width) | |||
Inches | Centimeters | Pounds | Kilograms |
< 25 | < 64 | 20 | 9.1 |
25 – 45 | 64 – 114 | 30 | 13.6 |
> 45 | > 114 | 50 | 22.7 |
backpack third party inline inspection services in China, backpack 3rd party inline inspection, China backpack third party inline inspection services, backpack inline inspection in China, backpack 3rd party inline inspection services in China, China backpack 3rd party inline inspection, backpack third party inline inspection in China, backpack 3rd party inline inspection in China, backpack third party inline inspection, backpack 3rd party inline inspection services, China backpack inline inspection, backpack third party inline inspection
3rd party preshipment products goods factory onsite final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.