Service Details
- Home
- Service Details
The furniture products like cabinets, are mostly made of MDF (medium density fiberboard), and some of them are of metal (steel file cabinets, aluminium cabinets etc.). The pre-shipment inspections for cabinets will check:
The 3rd party inspection services are mostly as below:
Please find below for an example of an on-site inspetion checklist for cabinets:
INSPECTION LIST | COMMENTS | RESULT |
---|---|---|
Perform a static loading test*- 300 lbs during 1 hour on the center of every seat simultaneously, at least 5cm away from the edges - There should be no obvious deformities | PASSED | |
If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects--S1 | FAILED | |
Perform assembly test according the manual instruction step by step.-S2 | PASSED | |
Perform a stability test. -For the front: The chair should not tip over when pushed with a downward force at the front edge equal to 40% of the chair’s weight. For the rear: The chair should not tip over when it is loaded with 175lbs, and pulled with a force of 25 lbs from the rear. Please take clear picture to show that the product is in the most unfavorable position on the inclined plane.-S1 |
FAILED | |
Perform a static loading test: - 300 lbs during 1 hour on the center of every seat simultaneously, at least 5cm away from the edges - There should be no obvious deformities |
FAILED | |
Perform a stability test. -For the front: The chair should not tip over when pushed with a downward force at the front edge equal to 40% of the chair’s weight. For the rear: The chair should not tip over when it is loaded with 175lbs, and pulled with a force of 25 lbs from the rear. Please take clear picture to show that the product is in the most unfavorable position on the inclined plane.-S1 | PASSED | |
Perform a fatigue test.- On all adjustable parts. Do this 20 times-S1 | FAILED | |
Perform a function test –II | PASSED | |
Test the strength of the seams by hand—II | PASSED | |
Perform a fatigue test.- On all adjustable parts. Do this 20 times-S1 | PASSED | |
Perform assembly test according the manual instruction step by step.-S2 | PASSED | |
Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.-II | PASSED | |
Perform moisture content test –(Check the moisture content of all wooden parts. - Check 3 points per piece and take the average data: (a+b+c)/3 - The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.-S2) | PASSED | |
Test the strength of the seams by hand—II | PASSED | |
Perform a function test –II | PASSED | |
If the item is stuffed, check the stuffing to make sure it is dry, clean and contains no foreign objects--S1 | PASSED | |
Perform a wobble test.-On a flat place - No foot of the item should lift more than 2mm.-II | PASSED | |
Perform moisture content test –(Check the moisture content of all wooden parts. - Check 3 points per piece and take the average data: (a+b+c)/3 - The moisture content for indoor products must be within 7%-12%; for outdoor products, it must be within 8%-16%.-S2) |
PASSED |
third partycabinet Quality inspection in Fujian, Fujian cabinet third party Quality inspection services, Fujian cabinet third party Quality inspection, Fujian cabinet 3rd party Quality inspection, Fujian cabinet Quality inspection services, Fujian cabinet 3rd party Quality inspection services, 3rd partycabinet Quality inspection in Fujian, cabinet Quality inspection in Fujian
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.