- Service Details
1. there are different inspection types for different production stages:
2. The on-site checking procedures for soft-line product inspections are as follows:
As an example, the quality inspection protocols would normally like this:
|INSPECTION CHECK LIST
|Count and record the number of stitches per inch
|3M Adhesive test for all markings, printing and logos found-The printing, markings & logos easily peel off. For example: on surface of hardwares, heat transfer label, printing care label, etc.（3M胶带测试）
|Symmetric check- check if the sleeves, collar, shoulders , pocket design, etc. are symmetric- check if the garment twist and measure the difference if found
|*S*: Needle detecting test without metal button or decoration
|FABRIC STRETCH (SEAMLESS ITEMS)
- CHECK THE FABRIC HAS CORRECT STRETCH (ITEMS MUST BE STRETCHY. WE HAD SOME ITEMS RECENTLY FROM THE SUPPLIER THAT DID NOT STRETCH ENOUGH TO WEAR COMFORTABLY).
|1，Perform wrong size checking and assortment check on all inspected cartons-1,Check the size label on the garment & compare with the indicated on polybag and cartons. No size or color mistakes should be observed in the cartons.
2, when inspector conduct the measurement, they should select one sample/each size that meet specification. And keep them separately as “good dimension sample”
3, As check the workmanship, inspector should check the samples by size. and put all the sampls with same size together, then put the “good dimension sample” on the top to check if have any wrong size found.混装检验
|Fabric-weight check for knitting garment with cutting equipment (unit: grams per square meter). This must be Performed from three places on one sample or from the bulk fabric available. Mark whether the sample was ironed before the test-A result within +/-5% of the clients requirements is acceptable -3 pcs ( Pcs)--克重检验
|MAIN SEW-IN LABEL (SUPPLIED BY SUPPLIER) TO BE ATTACHED ON THE INSIDE NECK.
|Zipper resistance test
The zipper should be easy to closed and open (should pass resistance test) and should not block half way of the opening or closing -II
|Zipper seam tension test-II拉链车缝检验
• ZIP QUALITY
- CHECK THE ZIPS FUNCTION WELL AND SMOOTHLY
- MUST BE SMOOTH AND EASY TO USE, MUST NOT GET CAUGHT OR BREAK
zippers on the jackets are strong and reliable. Previously from this supplier we had many problems with failed zippers. Either the zipper failed or the stitching to hold the zipper in placed came undone.
|Fitting check on a model or a doll(每个款每个色拍照)
|Seaming strength test-Test the strength of the seams by hand. especially on sideseams ,armhole, pockets.
strength test along seam to check stithes if broken.
|Smell check-check if there are any strong offensive odor-II(鼻子闻下是否有气味)
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check quality control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.