Service Details
- Home
- Service Details
1. there are different inspection types for different production stages:
2. The on-site checking procedures for soft-line product inspections are as follows:
As an example, the quality inspection protocols would normally like this:
ON-SITE INSPECTION LIST | COMMENTS | RESULT |
---|---|---|
1,Perform wrong size checking and assortment check on all inspected cartons-1,Check the size label on the garment & compare with the indicated on polybag and cartons. No size or color mistakes should be observed in the cartons. 2, when inspector conduct the measurement, they should select one sample/each size that meet specification. And keep them separately as “good dimension sample” 3, As check the workmanship, inspector should check the samples by size. and put all the sampls with same size together, then put the “good dimension sample” on the top to check if have any wrong size found.混装检验 |
PASSED | |
Fitting check on a model or a doll(每个款每个色拍照) 模特或模型试装 |
PASSED | |
Fabric-weight check for knitting garment with cutting equipment (unit: grams per square meter). This must be Performed from three places on one sample or from the bulk fabric available. Mark whether the sample was ironed before the test-A result within +/-5% of the clients requirements is acceptable -3 pcs ( Pcs)--克重检验 | PASSED | |
Count and record the number of stitches per inch 每英寸针数 |
FAILED | |
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-3 cartons | PASSED | |
Symmetric check- check if the sleeves, collar, shoulders , pocket design, etc. are symmetric- check if the garment twist and measure the difference if found 对称检查-检查袖子、领子、肩膀、口袋等设计是否对称-检查衣服的捻度,如果发现有差异就测量一下 |
FAILED | |
Zipper seam tension test-II拉链车缝检验 • ZIP QUALITY - CHECK THE ZIPS FUNCTION WELL AND SMOOTHLY - MUST BE SMOOTH AND EASY TO USE, MUST NOT GET CAUGHT OR BREAK zippers on the jackets are strong and reliable. Previously from this supplier we had many problems with failed zippers. Either the zipper failed or the stitching to hold the zipper in placed came undone. 夹克上的拉链结实可靠。以前从这个供应商那里我们有很多拉链坏了的问题。要么是拉链坏了,要么是用来固定拉链的缝线松了。 |
FAILED | |
Zipper resistance test The zipper should be easy to closed and open (should pass resistance test) and should not block half way of the opening or closing -II 拉链阻力试验,拉链应该易于关闭和开放(应该通过阻力测试)和不应该妨碍一半的打开或关闭 |
FAILED | |
Smell check-check if there are any strong offensive odor-II(鼻子闻下是否有气味) | N/A | |
*S*: Needle detecting test without metal button or decoration 针检测试(只对没金属配件的) |
PASSED | |
MAIN SEW-IN LABEL (SUPPLIED BY SUPPLIER) TO BE ATTACHED ON THE INSIDE NECK. | FAILED | |
Rub test to check the color fastness of the fabric (including the lining) and all the accessories(Labels must be rubbed for this test). Use a white cotton cloth to rub the material. Rub the item 10 times over a 10 cm distance with a force of 9N (1kg). Test 1 piece per color with both a dry and a wet cloth. Expected result: There should be no color transfer greater than 4 on a grey scale (between the original white cloth and the colored one) after the dry test. There should be no color transfer greater than 3-4 on a grey scale (between the original white cloth and the colored one) after the wet test 摩擦试验:检查织物(包括衬里)和所有附件的色牢度(此试验必须摩擦标签)。用一块白棉布擦这块材料。以9N (1kg)的力在10厘米的距离内摩擦物品10次。用干布和湿布各测试一种颜色。预期结果:干燥试验后,原白布与有色布之间的灰度转移不应大于4。湿布后,灰度(原白布与有色布之间)不得有大于3-4的颜色转移 |
FAILED |
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA QC check control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.